Mobile locksmithPensacola to Panama City Estimate agreed before work starts Typically there in 15–20 min Open 24/7 (850) 920-7113 Text us
Illustration: a car key in the ignition with the steering wheel behind it

What to do when your ignition key is stuck

(850) 920-7113

A stuck ignition key is often held by the shifter, the steering lock or a worn key, not a broken cylinder. Check those before pulling hard.

THE SHORT ANSWER

A key that will not come out of the ignition feels like a broken car, but most of the time something is simply holding it on purpose.

QUICK ANSWER

With a key stuck in the ignition, put the car fully in Park, turn the wheel gently while turning the key back, and check the battery. Do not pull with pliers. If it still will not come out, call (850) 920-7113.

Published: · Updated: · By the Best Value Locksmith team

Why will my key not come out of the ignition?

A key usually stays in the ignition for one of four reasons. The shifter is not fully in Park, so the interlock holds the key; a steering lock is under tension; the battery is too weak to release an electronic interlock; or the key or cylinder is worn. Try each in turn: shift firmly into Park, wiggle the steering wheel while turning the key back, and check whether the dash lights are dim. A key with worn or bent cuts can catch on the pins, and a cylinder full of debris does the same. Avoid lubricants that attract grit, pliers or force, because a snapped key turns an easy fix into an extraction and possibly a new cylinder. If the key turns but will not release, describe that when you call.

STEP 01

Check what is holding it

Automatic cars only release the key in Park, and some need the brake pressed. A steering lock under load grips the cylinder, so turn the wheel slightly each way while turning the key. A flat battery can stop an electronic interlock from letting go.

STEP 02

Look at the key itself

Compare it with a spare. Worn, bent or chipped cuts catch on the pins, and a heavy key ring pulls the cylinder out of line over time. If the spare comes out freely, the key is the problem and a fresh copy cut from the code fixes it.

STEP 03

What not to do

Pliers, hammers and household oil cause most of the damage we see. A key that snaps inside needs extraction, and oil holds dust in the cylinder. Stop after a few gentle tries.

STEP 04

When the cylinder needs work

If the key turns but will not release, or the cylinder feels loose or gritty, the ignition needs repair or replacement. Have the make, model and year ready, and say whether the car still starts.

Was this guide helpful?

GOOD QUESTIONS. STRAIGHT ANSWERS.

More questions about key stuck in the ignition

Can’t find your answer? Call or text and tell us what’s going on.

Put the car fully in Park, press the brake if your car needs it, and turn the key back to the off position while gently moving the steering wheel. Check that the battery is not flat. If the key still holds, try a spare to see whether the key or the cylinder is at fault. Do not use pliers or force. Call (850) 920-7113 with the make, model and year.

Yes, on many newer cars. An electronic interlock releases the key only when it has power, so a flat battery can leave the key trapped. Jump-starting or charging the battery often frees it. If the dash lights are bright and the key still will not release, the cause is somewhere else, such as the shifter or the cylinder. Call (850) 920-7113 if it stays stuck.

Not household oil or grease. They hold dust and make the pins stick more over time. A dry graphite or lock-specific lubricant is safer, used sparingly, and only after the simple checks. If the key needed lubricant to come out, the key or the cylinder is worn and will stick again. Call (850) 920-7113 to have it looked at before it fails on the road.
A SOLUTION STARTS WITH A CONVERSATION

Need a hand with a lock or key?

Call (850) 920-7113 and tell us what happened and where you are. We confirm availability and the estimate before any work begins.

Call now(850) 920-7113Text