Mobile locksmithPensacola to Panama City Estimate agreed before work starts Typically there in 15–20 min Open 24/7 (850) 920-7113 Text us
Illustration: a worn ignition cylinder next to a new one and a screwdriver

Should an ignition cylinder be repaired or replaced?

(850) 920-7113

An ignition cylinder that sticks or will not turn can often be repaired or rekeyed. Replacement is for cylinders that are broken, forced or badly worn.

THE SHORT ANSWER

An ignition that will not turn is often blamed on the cylinder when the key or the steering lock is the real problem. Rule those out first.

QUICK ANSWER

When an ignition key will not turn, try a spare key first and wiggle the steering wheel gently, since a locked column pins the cylinder. Don't force it or spray oil into it. Call (850) 920-7113 with the make, model and year.

Published: · Updated: · By the Best Value Locksmith team

What decides the cost of ignition cylinder work?

The cost of ignition cylinder work depends on the vehicle, whether the cylinder can be repaired or has to be replaced, whether the key also needs a transponder chip programmed, and how much of the steering column has to come apart. A worn key alone can mimic a failing cylinder, so testing with a spare comes first. We quote the full estimate, parts and labor, before any work. Before calling, try a spare key: if it turns smoothly, the original key is worn and only needs replacing. Note whether the key will not go in, will not turn, turns loosely, or turns while the car stays silent, because each points somewhere different.

STEP 01

Check the key and the steering lock

Turn the steering wheel gently both ways while turning the key, since a locked column pins the cylinder. Try a spare key if you have one. If the spare turns, the old key is worn and a new key may be all you need.

STEP 02

Signs the cylinder itself is failing

The key goes in but only turns part way, it turns without starting anything, or it comes out while the engine runs. A forced or damaged cylinder after a break-in also needs attention.

STEP 03

Repair, rekey or replace

Many cylinders can be repaired or rekeyed to the existing key. Replacement makes sense when the cylinder is broken or forced, and on some vehicles a new key has to be programmed afterward. Ask for the whole job in one estimate.

Was this guide helpful?

GOOD QUESTIONS. STRAIGHT ANSWERS.

More questions about ignition cylinder

Can’t find your answer? Call or text and tell us what’s going on.

An ignition switch is usually replaced rather than repaired, while a worn ignition cylinder can sometimes be repaired or rekeyed to your existing key. Try a spare key and free the steering lock first, since either can look like a failed ignition. Ignition repair at Best Value Locksmith starts from $325, and we quote the full job first.

It depends on whether you need a new key or ignition work. A replacement car key starts from $145 at Best Value Locksmith, and ignition repair from $325. Try a spare first: if the spare turns, the old key is worn and a new key may be all you need. You get the full estimate before work starts.

Some first steps are safe, such as checking for a spare key, a privacy-release hole or fresh batteries. Forcing a key, prying a door or drilling a lock usually turns a small job into a bigger one, and can damage the door, frame or vehicle. If the first checks do not work, stop and call. Call (850) 920-7113 and describe what you have already tried.

Have your exact location, a callback number and a short description of what happened. For a vehicle, add the make, model and year and say whether any working key remains. For a home or business, tell us which doors are involved and who can authorize the work. The technician may ask for ID and proof that you own the vehicle or property. Call (850) 920-7113 and we will take it from there.

Yes, every time. Before we make a key or finish opening a vehicle, home or business, we ask for photo ID and something that ties you to it: registration or title for a vehicle, a lease, utility bill or owner authorization for a property. It protects you as much as it protects us, and it is why we ask who can authorize the work when you call. Call (850) 920-7113 if you have questions about what counts.
A SOLUTION STARTS WITH A CONVERSATION

Need a hand with a lock or key?

Call (850) 920-7113 and tell us what happened and where you are. We confirm availability and the estimate before any work begins.

Call now(850) 920-7113Text